37' Hunter 1985 - Cutter - YS190157
This is a well- designed cutter, capable of offshore passages. She's stiff and secure, predictable in all conditions, with great performance to wind.
Overall, the appearance of this 37' Hunter is in very good shape. Cosmetically, bright work needs some refinishing; however, it's in good condition. Stress cracks appear throughout decking but does not seem to have any evidence of water intrusion.
The mast is approximately 50' in length, made out of aluminum material, will need some repainting. All the rigging lines and cable appear to be in very good shape. However, no sails were inspected at this time. The canvas/bimini all appear in good condition, but was not completely seen.
Plastic is clear with no rips or tears. Owner stated there were two small tears in bimini when opened and all hatches have a canvas cover; in good shape. The stove and cook top were not checked but the owner stated they were in working condition. These units run from a propane tank which was stored separately in a back hatch in its own container.
All the cabinets were clean and free from any evidence of mold or water intrusion. The vessel has approximately 6'5" height with a fiberglass ceiling. Forward and aft cabins also show well. The head has a Raritan with stand-up shower.
Engine was inspected; it is a Yanmar Diesel, Model 4 JHE, 44hp. Engine idled at approximately 800 rpm. All liquid levels appear to be clean and at proper levels. Engine showed well. No rust under oil pan or oil in bilge. After inspecting engine, the Hunter was started by owner at the dock with no issues.
She was inspected in the water, so bottom could not be inspected at this time. However, owner did point out the vessel was equipped with a breakaway shaft. Hot water heater was inspected; also, in very good condition. This is a great opportunity to own a well-appointed sailboat for cruising. Please inspect carefully before making an offer.
A trailer is not included in this sale.
Nationwide transportation is available through CertifiedMarineTransport.com. Custom Cradles and shipment to port for overseas transport also supplied. Call Robert or Brian at (508) 478-0200 for logistics and quotes.
Yanmar Diesel Model 4 JHE.
Engine idled at approximately 800 rpm
All liquid levels appear to be clean and at proper levels
Engine shows well - No rust under oil pan or oil in bilge
Please read Motors and Machinery Disclaimer.
Motors and Machinery Disclaimer
No statement of condition can be made regarding motors, engines or machinery, whatsoever. A photo may appear of the engine compartment and machinery, but it is entirely the buyers responsibility to inspect and determine their actual condition.
¿Necesitas Ayuda en Español?
Si necesita comunicarse en Español llame a nuestra oficina en Warwick, RI (401) 732-6300, pregunte por Virginia Barrios.
Usted puede encontrar Transporte, Marinas, Partes y mucho más en BoatHelpers.com
- Year: 1985
- Make: Hunter
- Model: Cutter
- Model Type: Cutter
- Length: 37'
- Beam: 12' 4"
- Weight: 17800 lbs.
- Engine(s): Single Yanmar Model 4JHE, 44hp
- Fuel Type: Diesel
- Fuel Tankage: 44 gal
- Water Tankage: 100 gal
- Hull Material: Fiberglass
- Location: Port Jefferson, NY
- Boat Name: "SHADOW"
- Stock #: YS190157
- Broker: Mike Costa
- Email: Mike@CertifiedSales.com
- Phone: (401) 732-6300
- Fax: (401) 737-0200
Are You Interested?
Get our Weekly Newsletter
We always encourage potential Bidders/Buyers to view the item personally or have someone else inspect it for you prior bidding. It is entirely the buyer's responsibility to inspect and determine the vessel's actual condition.
Do not assume accessories or equipment for this vessel may be in storage. This vessel is being sold as seen. Bid for this boat according to what she has when you view her.
Disclaimer: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A Buyer should investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
All Marine products be they owned or brokered by Certified Sales, Inc. or its associates, are sold AS-IS, WHERE-IS, NO WARRANTY OR GUARANTEE EXPRESSED OR IMPLIED. NO WARRANTIES OF MERCHANTABILITY AND FITNESS WHAT-SO-EVER. No verbal agreements can be applied to the sale of this marine product.
Certified Sales, Inc. has 40 years of experience selling Repossession, Insurance Salvage and Brokerage Boats, Marina Equipment, RV’s and Motorcycles.